Page 175 - 2025年7月防腐蚀专辑
P. 175

张玉 等:近红外光固化丙烯酸酯防腐涂料的制备及性能研究


                                  5 d         10 d         15 d         20 d         25 d         30 d

                    NIR-IBOA


                   NIR-HDDA


                   NIR-TMPTA


                     UV-IBOA



                    UV-HDDA


                   UV-TMPTA
                                图6 不同官能度活性 释剂下 NIR和UV固化  涂层的耐中性盐 试验结果
                   Fig. 6  Results of neutral salt spray tests of the NIR and UV-cured intact coatings with different functional active diluents
             释剂体系在测试 15 d 后出现明显点蚀,且随着测试
                                                                                   参考文献
             时间延长至 20 d,点蚀面积扩大。相较于 UV 固化涂
             层,所有的 NIR固化涂层在整个测试中并没有出现明                          [ 1 ] WEI  G,LIU  H,ZHOU  Y,et  al. Solvent-free  high-
                                                                     performance   insulating   coatings   from   photocurable
             显的点蚀或起泡等腐蚀现象,说明NIR固化涂层的防
                                                                     polyimide resin for electronic circuit boards[J]. Progress in
             腐效果更加优异,这与 EIS 测试结果相一致。以上结                              Organic Coatings,2024,189:108260.
                                                                [ 2 ]   玥,孙冠 ,刘仁 . 光敏聚氨酯丙烯酸酯固化收缩应
             果表明,NIR 固化涂层构建起的交联网络呈现出更为
                                                                     力的影响因素[J]. 高分子材料科学与工程,2022,38(3):
             均匀且致密的特性,进而构筑起更为牢固的物理阻                                  96-105.
             隔屏障,能够显著地延缓腐蚀介质向金属基材渗透                                  TONG M  Y,SUN  G  Q,LIU  R. Influence  factors  on  the
                                                                     curing shrinkage stress of photocurable polyurethane
             的时长,增强了涂层对金属的保护能力,有效延长了                                 acrylates[J]. Polymer Materials Science & Engineering,
             其在复杂环境下的使用寿命和稳定性。                                       2022,38(3):96-105.
                                                                [ 3 ] CHEN  Y,LIU  R,LUO  J. Improvement  of  anti-aging
                                                                     property of UV-curable coatings with silica-coated TiO [J].
             3  结 语                                                  Progress in Organic Coatings,2023,179:107479.  2
                                                                [ 4 ]  威豪,刘仁,罗静 . 紫外光固化聚苯胺防腐涂层的制备
                 本研究使用近红外(NIR)光诱导上转换粒子辅                              与应用[J]. 涂料工业,2022,52(3):1-9.
                                                                     PAN  W  H,LIU  R,LUO  J. Preparation  and  application  of
             助光聚合技术制备了具有优异附着力和防腐性能的                                  UV curable polyaniline anti-corrosive coatings[J]. Paint &
             光固化防腐涂层。探究了 NIR固化体系的固化条件、                               Coatings Industry,2022,52(3):1-9.
                                                                [ 5 ] HU  P,GUO  Z,ZOU  X,et  al. Near-infrared  induced
             涂层固化行为以及不同官能度活性稀释剂所得涂层                                  cationic  photopolymerization: a  versatile  method  for
             的附着力和防腐性能。结果表明,当 Irgacure 819 添                         preparing thick polymer materials[J]. Chemistry Letters,
                                                                     2022,51(12):1106-1108.
             加量为 2%、UCPs 添加量为 4%、NIR 功率密度为
                                                                                     e
                                                                [ 6 ] HU P,XU H,PAN Y,t al. Laser induced thermal effect on
             30 W/cm 时,聚合速率最快且双键转化率最高。相比                             the  polymerization  behavior  in  upconversion  particle
                    2
                                                                     assisted near-infrared photopolymerization[J]. ChemPhysChem,
             于 UV 固化体系,NIR 固化体系的表面/底面双键转化
                                                                     2021,23:63-68.
             率均可达到 90%,还能够提高凝胶点双键转化率,有                          [ 7 ] ZOU  X,ZHAO  Y,ZHU  Y,et  al. Filling  aggregation-
                                                                     induced extinction mechanism in near-infrared photopolymeri-
             利于降低固化收缩应力,从而提升涂层的附着力及
                                                                     zation for gradient and highly filled bulk materials[J].
             耐腐蚀性。使用单官能度活性稀释剂的涂层表现出                                  Macromolecules,2022,55(6):2075-2084.
                                                                                                      e
             最高的附着力,表现出优异的防腐性能。NIR 固化为                          [ 8 ] BUSE U,MARIA ISABEL Á-C,ANTOINE B,t al. Single-
                                                                     photon-assisted  two-photon  polymerization[J]. Additive
             制备绿色环保高性能防腐涂层提供了一种新策略,                                  Manufacturing,2024,94: 104455.
             有望在金属防腐涂层领域取得更广泛的应用。
                                                                                                          172
   170   171   172   173   174   175   176   177   178   179   180