Page 133 - 2025水性涂料虚拟专辑
P. 133

光 等:环氧酯改性水性丙烯酸树脂的制备及漆膜性能


                                                            续表5
             项目                  AF/TEA-Q30           AF/TEA-Q35          AF/TEA-Q40           AF/TEAQ-45
             水接触角/(°)                 67. 2               70. 8                71. 2               74. 6
             吸水率/%                    1. 99               1. 58                1. 40               1. 30
             光泽(60°)                 101. 6               102. 3              103. 6               104. 3
             耐水性/h                    360                  480                 480                  480
             耐溶剂擦拭性/次                 450                  500                 500                  500
             附着力/级                     1                    0                   0                    1
             铅笔硬度                     4H                   3H                  4H                   4H

             耐冲击性/cm                   45                  50                   50                  40
             漆膜光泽高      [17-18] 。但加入氨基树脂后,漆膜的耐冲击                     enhanced  anticorrosive  performance[J]. Journal  of  Polymer
             性下降,这是由于氨基树脂中刚性结构的引入,导致                                 Science,2023,61(21):2677-2687.
             分子链柔性变差,漆膜在宏观上表现出耐冲击性变                             [ 4 ] 李玉,袁东明,吴 ,等 . 多重自交联水性丙烯酸树脂分
                                                                     散体的制备及性能研究[J]. 涂料工业,2023,53(7):
             差。同时在环氧酯结构中既含有“硬段”部分,又含有
                                                                     52-60.
             接枝上去的长链不饱和脂肪酸这个“软段”部分 ,在
                                                       [19]
                                                                     LI Y,YUAN D M,WU Q,et al. Preparation and properties
             环氧酯添加量为35%时,聚合物中“软段”和“硬段”比
                                                                     of  multiple  self-crosslinking  waterborne  acrylic  resin
             达到一个较佳的比例,表现出较好的力学性能。                                   dispersion[J]. Paint  &  Coatings  Industry,2023,53(7):
                                                                     52-60.
             3  结 语                                             [ 5 ] 王明 ,张新宇,李永文,等 . 水性丙烯酸改性环氧酯防
                                                                     腐涂料的研制[J]. 中国涂料,2016,31(11):31-34,52.
                 通过酯化反应将桐油酸接枝到环氧树脂E-44主
                                                                     WANG  M  J,ZHANG  X  Y,LI Y W,et  al. Preparation  of
             链上,成功制备了环氧酯 TE44。当环氧酯添加量为                               waterborne  acrylic-modified  epoxy  acrylate  anti-corrosive
             35%时,环氧酯改性水性丙烯酸树脂的TSI为1. 52,稳                           coatings[J]. China Coatings,2016,31(11):31-34,52.
             定性较佳,平均粒径为 30. 22 nm,粒径分布指数为                       [ 6 ] HU L L,CHEN M M,CAO M Y. TiO  antifouling coating
                                                                                                 2
             0. 34。引入氨基树脂制备双组分环氧酯改性水性丙                               based  on  epoxy-modified  tung  oil  waterborne  resin[J].

             烯酸树脂漆膜的综合性能优于单组分漆膜,环氧酯添                                 Polymers and Polymer Composites,2021,11,2350-2360.
             加量为35%时,漆膜各项性能较佳,在汽车工业、工程                          [ 7 ] ZHANG  K,CHEN  X  F,XIAO  Y  L,et  al. Enhanced
                                                                     anticorrosion properties through structured particle design of
             机械制造、航空船舶等领域具有广阔的应用前景。
                                                                     waterborne  epoxy-styrene-acrylate  composite  emulsion[J].
                                参考文献                                 Coatings,2021,11,1422.
                                                                [ 8 ] 周文涛,陈艳丽 . 水性丙烯酸改性环氧酯防腐漆的研
             [ 1 ]  伟,赵玉 ,陈立 ,等 . 水性丙烯酸树脂涂料的改性
                                                                     制[J]. 上海涂料,2007,45(3):13-14.
                 及应用研究进展[J]. 江苏科技大学学报(自然科学版),
                                                                     ZHOU W T,CHEN Y L. Preparation of waterborne acrylic-
                 2020,34(2):80-89.
                                                                     modified  epoxy  acrylate  anti-corrosive  paint[J]. Shanghai
                 QIANG  W,ZHAO  Y  Y,CHEN  L  Z,et  al. Research     Coatings,2007,45(3):13-14.
                 progress  on  modification  and  application  of  waterborne   [ 9 ] 沈文军,王 明,徐杰,等 . 环氧改性丙烯酸树脂复合乳
                 acrylic  resin  coatings[J]. Journal  of  Jiangsu  University  of   胶的合成及其性能研究[J]. 涂料工业,2017,47(2):
                 Science and Technology(Natural Science Edition),2020,  33-39.

                 34(2):80-89.                                        SHEN  W  J,WANG  S  M,XU  J,et  al. Preparation  and
             [ 2 ] TILLET  G,BOUTEVIN  B,AMEDURI  B. Chemical        properties of hybrid latex based on epoxy-modified acrylate
                 reactions  of  polymer  crosslinking  and  post-crosslinking  at   resin[J]. Paint & Coatings Industry,2017,47(2):33-39.
                 room  and  medium  temperature[J]. Progress  in  Polymer   [10] 王 ,王明 ,于学亚,等 . 水性环氧酯改性丙烯酸树脂
                 Science,2011,36(2):191-217.                         的制备及其性能研究[J]. 中国涂料,2018,33(8):36-40.
             [ 3 ] GAO  F  J,LIU  Y,JIAO  C  Y,et  al. Fluorine-phosphate   WANG  L,WANG  M  J,YU  X  Y,et  al. Preparation  and
                 copolymerization  waterborne  acrylic  resin  coating  with   properties of waterborne epoxy ester modified acrylic resin[J].
                                                                                                          1 0
   128   129   130   131   132   133   134   135   136   137   138