Page 176 - 2025水性涂料虚拟专辑
P. 176

第54卷                                      涂料工业                                      Vol. 54
             2024年第1期增刊                    熊泉波等:环保型材用水性双组分聚氨酯涂层研究                                  Suppl. 1 2024
                                                   PAINT & COATINGS INDUSTRY


                             环保型材用水性双组分聚氨酯涂层研究




                                          熊泉波,谷        雨,孙伟祖,景传明,许幸洪
                                     (万华化学集团股份有限公司,山东烟台264006)

                     摘 要:玻纤增强聚氨酯型材由于其环保性、绝缘性、保温性和性价比优异,逐步取代传统的铝
                 合金型材,被应用在光伏边框、门窗边框上。采用羟基丙烯酸分散体、异氰酸酯固化剂为主要原材
                 料,搭配颜填料、功能助剂配制出的水性双组分聚氨酯涂层,在各厂家生产的玻纤增强聚氨酯环保型
                 材上具备优异的附着力及物化性能,符合多种环境对型材涂层的性能要求。本文探讨了固化剂类
                 型、分散体类型、pH 等因素对水性双组分聚氨酯涂料活化期、耐水性等性能的影响。结果表明,水性
                 双组分聚氨酯涂层是较适合应用在环保型材上的涂层体系。
                     关键词:水性双组分聚氨酯;丙烯酸分散体;环保型材
                     中图分类号:TQ637. 81  文献标志码:A  文章编号:0253-4312(2024 1增刊)-0033-08
                     doi:10. 12020/j. issn. 0253-4312. 2024-Z1-05
                    Study on Waterborne Two-component Polyurethane Coating

                               Applied to Environmentally Friendly Profiles


                                                                 J
                             XIONG Quanbo,GU Yu,SUN Weizu,ING Chuanming,XU Xinghong
                                (Wanhua Chemical Group Co     Ltd     Yantai,Shangdong   264006,China)

                      Abstract:Glass fiber reinforced polyurethane profiles have gradually replaced traditional
                 aluminum  alloy  profiles  and  are  used  in  photovoltaic  borders  and  door  and  window  borders

                 because  of  its  environmental  protection,insulation,heat  preservation  and  excellent  cost
                 performance. The waterborne two-component polyurethane coating,which was prepared with
                 hydroxyl acrylic dispersion and isocyanate curing agent as the main raw materials,combined
                 with facial fillers and functional additives,exhibited excellent adhesion and resistance on the
                 glass fiber reinforced polyurethane environmental profiles produced by various manufacturers,
                 and  met  the  performance  requirements  of  profile  coatings  in  various  environments. In  this

                 paper,he effects of curing agent type,dispersion type,pH value,and other factors on the pot
                        t
                 life and water resistance of waterborne two-component polyurethane coatings were discussed.
                 The  results  showed  that  the  waterborne  two-component  polyurethane  coating  was  the  most
                 suitable coating system for environmentally friendly profiles.
                      Key words:waterborne two-component polyurethane;acrylic dispersion;environmental
                 protection profile

                 为了响应国家“双碳”的要求,各行各业都在朝                          玻璃纤维和聚氨酯树脂通过拉挤工艺而制得的一种
             着绿色环保的方向发展。玻纤增强聚氨酯型材是由                             复合材料 。与铝合金型材相比,其生产过程碳排放
                                                                         [1]
             本文规范引用格式:
             熊泉波,谷雨,孙伟祖,等. 环保型材用水性双组分聚氨酯涂层研究[J]. 涂料工业,2024,54(增刊1):33-39,46.
             XIONG  Q  B,GU  Y,SUN  W  Z,et al. Study on waterborne two-component polyurethane coating applied to environmentally friendly profiles [J]. Paint &
             Coatings Industry,2024,54(Suppl. 1):33-39,46.

               1
   171   172   173   174   175   176   177   178   179   180   181