Page 9 - 1903完整版
P. 9

第 40 卷第 3 期                                                                              Vol.40 No.3
                                                       涂层与防护
           2019 年 3 月                                                                                  Mar.2019
                                                  COATING AND PROTECTION





               大气暴露环境下潮湿表面选用涂料的技术要求




                                                         马建华
                                            (广州资宝科技有限公司,广州 510510)


                    摘要: 处于大气暴露环境中的潮湿表面的防护与维修保养一直是困扰设备和管道运营者的重大技术
                难点之一。 本文针对钢质结构潮湿表面缺陷形成的机理, 论述了干湿交替潮湿表面腐蚀环境的界定及危
                害、涂料体系的选择依据与维修保养注意事项;重点提出了典型涂料体系及相关技术要求、典型涂料产品
                及相关技术要求,并介绍了其他防护体系的优劣势。
                    关键词:潮湿表面;干湿交替;腐蚀环境;涂料;防护;维保
                    中图分类号:TQ639          文献标识码:A         文章编号:1672-2418(2019)03-0001-05


                Research( on( Coatings( for( wet( Surface( Exposed( to(

                                        Atomospheric(Environment


                                                       Ma#Jianhua
                               (Guangzhou Zibao Technology Co., Ltd., Guangzhou 510510, China)


                   Abstract:(Protection and maintenance of wet surfaces in atmospheric corrosion environments has
                been one of the major technical difficulties challenging those equipment and pipeline operators. In
                this paper, based on the formation mechanism of defects on the wet steel surface structures, the
                determination of corrosion environment and its hazard of dry-wet alternation, the selection of coating

                system and critical details of maintenance are discussed. The typical coating system and related
                technical requirements, typical coatings products and related technical requirements are described in
                particular. In addition, other protection systems and their advantages and disadvantages are
                introduced.
                    Keywords:wet surface; dry -wet alternation; corrosion environment; coatings; protection;
                maintenance and repair





           0 引言                                                的水汽也会凝结在设备和管道表面, 不断侵蚀涂层,
                                                               逐渐渗透,直至涂层起泡、开裂和脱落。 石化和电力行
               自本世纪初,随着经济的快速发展,出现在石油                           业工业废气中的氮氧化物和硫氧化物还会形成更为
           化工、电力、基础设施建设中的动静设备和长距离输                             严酷的酸性气体腐蚀环境。
           送管道越来越多,这些设备和管道构成了生产运营的                                 在各种大气腐蚀环境类型中,最为常见也是无法
           主体部分,在工业发展中发挥了核心作用。 与此同时,                           避免的,便是水汽的凝结。 因为大气中的水汽无处不
           由于经常暴露于大气中,太阳光中的紫外线会损害设                             在,四季循环,温度和相对湿度经常变化,设备和管道
           备和管道表面的涂层,造成老化、粉化等现象;大气中                            表面不时会有水蒸气冷凝、挂壁。 有些设备和管道的


                                                                      腐蚀与控制 CORROSION AND CONTROL          1
   4   5   6   7   8   9   10   11   12   13   14