Page 5 - 2025水性涂料虚拟专辑
P. 5
易 英等:聚(3,4-乙撑二氧噻 )聚苯乙烯磺酸钠(PEDOT/PSS)水性抗静电分散体稳定性研究
/
and the properties of paint films were studied. The results showed that different silane coupling
agents,organic amine or inorganic ammonia pH regulators,and monohydric or diol solvents
indicated an important impact on the stability of the obtained aqueous dispersions,he stability
t
of the distribution of membrane microstructure,and the conductivity of the film. The
conductivity of the coating solution after the addition of silane coupling agent VTMS and
alcohol solvent IPA increased by an equal order of magnitude. The conductivity of the aqueous
dispersion containing 5 mol/L inorganic ammonia water remained above 200 S/cm after being
stored in a 50 ℃ drying oven for one week. Inorganic alkali ammonia water played a crucial
role in improving the stability of the aqueous anti-static dispersion.
Key words:antistatic coating;PEDOT/PSS;water dispersible;preparation;storage
stability
PEDOT[聚(3,4-乙撑二氧噻 )是一种性能优 PEDOT/PSS 薄膜表面结构和性能的精准调控 [5-6] 。例
]
良的聚噻 类导电聚合材料,具有能隙小、氧化电位 如,二甲基亚 (DMSO)作为溶剂型导电助剂已经广
低、导电率高以及透光性好等优点 ,但 PEDOT 本身 泛地应用于 PEDOT/PSS 水分散涂布液的制备,不仅
[1]
的“难溶难熔”特性限制了其后续应用的施工性能 。 有助于提高 PEDOT/PSS 薄膜的导电率,还可以改善
[2]
水溶性 PSS(聚苯乙烯磺酸)是最常用作改善 PEDOT PEDOT/PSS 薄膜的形貌、界面接触和机械性能等参
施工性能的 杂剂,PEDOT 经 PSS 杂后,非水溶的 数 。单醇和多元醇的添加可促进 PEDOT 与 PSS 在
[7]
PEDOT 导电分子链与强亲水的 PSS 链以电荷平衡的 基体表面上的形貌、分布状态和相互作用等发生变
形式结合起来,稳定分散于水中,分散体在不同的基 化,有利于载流子在导电通道的传输,提高导电率。
体上涂布干燥即可成膜,大大提高了加工性能,如图1 另外,为了进一步提高 PEDOT/PSS 薄膜的机械性能
所示 。 基于良好的稳定性和兼容性 ,目前 和耐醇性能,常添加树脂作为成膜物质。
PEDOT/PSS 水分散体已广泛应用于有机薄膜太阳能 除了导电率因素,PEDOT/PSS 水分散涂布液的
电池、有机发光二极管、电致变色材料、透明电极材 稳定性也是影响成膜性能的关键因素之一 。 在
料等领域 。 PEDOT/PSS 水分散涂布液体系中,磺酸根 离子与
[3]
PEDOT/PSS 结构中的 PSS聚合链呈绝缘性,且涂 PEDOT 链段上阳离子相互平衡并在一定范围内稳定
布干燥成膜后的颗粒呈现 PEDOT 富集于内核而 PSS 存在,但体系中树脂和其他 杂剂的引入可能会造
富集于外壳的核-壳形貌结构 ,导致 PEDOT/PSS 分 成体系内带电胶团的聚并和沉积,影响体系的稳定
[4]
散体的导电率较低,无法达到实际应用对导电率的 性。事实上,工业上对 PEDOT/PSS 涂布液低温快速
要求。通过添加特定属性的导电助剂,可实现对 成膜的要求与 PEDOT/PSS 涂布液长期稳定贮存的要
) ) ) )
N
图1 PEDOT/PSS水分散体结构示意图
Fig. 1 Schematic structure of PEDOT/PSS aqueous dispersion
00