Page 9 - 涂层与防护2020-03完整版
P. 9
涂层与防护
第 41 卷第 3 期 Vol.41 No.3
Mar.2020
2020 年 3 月
COATING AND PROTECTION
渤海某油田井下管柱腐蚀原因分析
方培林, 杨凯, 权宝华, 何东
(中海油(天津)油田化工有限公司,天津 300452)
摘要: 渤海某油田采用聚合物驱油作为油田三次采油的主要方式,2013—2017 年修井期间共发现一
批注聚受益井井下管柱腐蚀穿孔 14 井次,其中分离器腐蚀断裂 7 井次。 本文通过对入井液分析、氯离子腐
蚀预测、SRB 含量分析、天然气成分分析、采出液腐蚀评价、腐蚀产物分析等,对腐蚀穿孔原因进行了分析,
并提出一些指导性建议。
关键词:生产管柱;井下腐蚀;腐蚀穿孔;扫描电镜
+
中图分类号:TQ630.7 2 文献标识码:A 文章编号:1672-2418(2020)03-0001-07
Analysis of Downhole String Corrosion in Oilfield of Baohai Sea
Fang Peilin, Yang Kai, Quan Baohua, He Dong
(CNOOC Ener-Tech Oilfield Oil Chemical Co., Ltd., Tianjin 300452, China)
Abstract: Polymer flooding is the main way of tertiary oil recovery in an oilfield in Bohai Sea.
During the workover period from 2013 to 2017, 14 times of downhole string corrosion and perforation
were found in one annotation poly benefit well, including 7 times of separator corrosion and fracture.
In this paper, the reasons of corrosion perforation were analyzed and some guiding suggestions were
put forward through the analysis of inflow fluid, prediction of chloride corrosion, analysis of SRB
content, analysis of natural gas composition, evaluation of produced fluid corrosion and analysis of
corrosion products, etc.
Keywords: production string; downhole corrosion; corrosion perforation; SEM
0 引言 出,这对油田开采造成了极大影响。 根据腐蚀机理的
不同,造成井下管柱腐蚀的原因也各不相同。 要想针
聚合物驱作为油田三次采油的主要方式,由于增 对性地实施防腐措施, 首要问题就是明确腐蚀的原
油效果显著,该技术在国内陆地油田应用广泛。 渤海 因,因此本文通过对入井液分析 、氯 离子 腐蚀 预 测、
油田早在 2003 年就开展了单井聚合物驱实验, 并取 SRB 含量分析、天然 气成 分 分析 、采出 液 腐蚀 评价 、
得了良好的开发效果。 到目前为止,渤海油田已在辽 腐蚀产物分析等, 对井下管柱腐蚀穿孔原因进行分
东作业公司下辖的绥中 36-1 油田等油田开展了大规 析,为后续防腐提供理论依据。
模聚合物驱油现场试验 [1-2] 。 注水注聚井油管腐蚀、井
内污垢积聚以及聚合物垢卡等问题日益突出,导致注 1 采出液腐蚀分析
采量下降,严重影响油田的正常生产和经济效益 。
[3]
现如今, 渤海油田的井下管柱腐蚀问题极为突 渤 海 某 油 田 在 2013—2017 年 修 井 期 间 共 发 现
1
腐蚀与控制 CORROSION AND CONTROL